Integra DTR-6.9 review

Our rating:

• 144.5
• 1
• 2
• 3
• 4
• 5
• 6
• 7
• 8
• 9
• 10

 8.5/10 from 2 reviewers.

Comments:0

THX Select2 Plus, 2 Zone, 7.1 Channel Surround ReceiverAmplifier Section          
All channels:        
100 watts minimum continuous power per channel, 8 ohm loads, 2 channels driven from 20 Hz to 20 kHz, with a maximum total harmonic distortion of 0.08%
115 watts minimum continuous power per channel, 8 ohm loads, 2 channels driven at 1 kHz, with a maximum total harmonic distortion of 0.7%
125 watts minimum continuous power per channel, 6 ohm loads, 2 channels driven at 1 kHz with a maximum total harmonic distortion of 0.1%

Maximum Output Power (JEITA): 7 ch x 175 W at 6 ohms, 1 kHz, 1 ch driven
Dynamic Power:       
240 W (3 ohm, Front)
210 W (4 ohm, Front)
120 W (8 ohm, Front)

THD (Total Harmonic Distortion): 0.08% (Power Rated); 0.08% (1 kHz, 1 W)
Damping Factor: 60 (Front, 1 kHz, 8ohm)
Input Sensitivity and Impedance: 200 mV/ 47 kohm (LINE)
Output Level and Impedance: 200 mV/ 470 ohm (REC OUT)
Frequency Response: 5 Hz–100 kHz/ +1 dB-3 dB (Direct mode)
Tone Control:
±10 dB, 50 Hz (BASS)
±10 dB, 20 kHz (TREBLE)

Signal to Noise Ratio: 106 dB (LINE, IHF-A)
Speaker Impedance: 4ohm–16ohm
Video Section        
Level and Impedance:
1 Vp-p /75ohm (Component and S-Video Y)
0.7 Vp-p /75ohm (Component Pb/Cb,Pr/Cr)
0.28 Vp-p /75? (S-Video C)
1 Vp-p /75ohm (Composite)

Component Video:  -        
Frequency Response: 5 Hz – 50 MHz
Tuner Section
FM Tuning Frequency Range: 87.5 MHz– 107.9 MHz
AM Tuning Frequency Range: 530 kHz–1710 kHz
Digital Tuner: XM, Sirius
Preset Channel: 40
General
Power Supply: AC 120 V, 60 Hz
Power Consumption: 5.9A
Standby Power Consumption: -
Dimensions (W X H X D): 17-1/8" x 6-3/4" x 15-3/8" or 435 x 172 x 391 mm
Weight: 27.4 lbs. / 12.4 kg

Video review